絞り込み
Pumps for Specific Applications
Coolant Models
-
VCC models- Pumps for Specific ApplicationsCoolant Models
Coolant and floating oil collection related
●The vortex structure prevents clogging with sludge.
●The non-seal structure does not use a mechanical seal and is resistant to sludge.
●Durable, abrasion resistant and long service life.
●The motor can be replaced without disconnecting the piping by the coupling method. -
VCD models- Pumps for Specific ApplicationsCoolant Models
- Coolant and floating oil collection related
●The vortex structure prevents clogging with sludge.
●The non-seal structure does not use a mechanical seal and is resistant to sludge.
●Durable, abrasion resistant and long service life. -
TRC models- Pumps for Specific ApplicationsCoolant Models
- Coolant and floating oil collection related
●Solid-liquid separation from dirty liquid produces clean liquid.
The solid-liquid separated sludge is discharged outside.
● Sludge removal rate is over 90%. (In the case of a particle size of 20 μm or more, our company's test results)
●Magnetic material (cast metal) and non-magnetic material (aluminum/abrasive) can be filtered.
●Running costs can be reduced because there are no consumable parts such as filter elements.
● Special rubber is used for wetted parts to improve durability and wear resistance.
●Main unit can be disassembled and maintained.
● Filtration is possible at an inflow pressure of 0.1 MPa or more. -
DS1-120 models (OIL SKIMMER)- Pumps for Specific ApplicationsCoolant Models
- Coolant and floating oil collection related
● A bellows-type surface liquid suction device that follows the liquid surface is used.
It is possible to follow and inhale water level fluctuations up to about 90 mm.
●Separation tank and pump unit can be separated.
You can easily clean the separation tank.
●A bellows pump is used for the suction pump.
"Collects floating oil stably."
No priming required, dry operation possible. -
DSF models (Float Pumps)- Pumps for Specific ApplicationsCoolant Models
- Coolant and floating oil collection related
●The float + bellows type surface liquid suction device eliminates the need for adjustment even when the water level fluctuates.
Follows water level fluctuations as long as the water level is above the minimum operable level.
●Small size, light weight and easy to carry.
It fits into a circular manhole inner diameter of φ600.
● Collects and discharges floating oil and floating matter.
●A vortex-type submersible pump is used to prevent clogging even with solids. -
DSB models (Oil-water separation tank)- Pumps for Specific ApplicationsCoolant Models
- Coolant and floating oil collection related
●It has a simple structure that separates oil and water based on the difference in specific gravity.
It is an eco-friendly product because it does not use consumables such as filters.
"Cleaning and disassembly maintenance can be performed easily."
●The main body of the oil-water separation tank is made of stainless steel (SUS304), which is resistant to corrosion and can be used outdoors.
●A basket is provided to remove coarse dust.
FAQs
Provides help information on how to use each product and when you have problems.
