絞り込み
Pumps for Specific Applications
-
DSF models (Float Pumps)- Pumps for Specific ApplicationsCoolant Models
Coolant and floating oil collection related
●The float + bellows type surface liquid suction device eliminates the need for adjustment even when the water level fluctuates.
Follows water level fluctuations as long as the water level is above the minimum operable level.
●Small size, light weight and easy to carry.
It fits into a circular manhole inner diameter of φ600.
● Collects and discharges floating oil and floating matter.
●A vortex-type submersible pump is used to prevent clogging even with solids. -
DSB models (Oil-water separation tank)- Pumps for Specific ApplicationsCoolant Models
- Coolant and floating oil collection related
●It has a simple structure that separates oil and water based on the difference in specific gravity.
It is an eco-friendly product because it does not use consumables such as filters.
"Cleaning and disassembly maintenance can be performed easily."
●The main body of the oil-water separation tank is made of stainless steel (SUS304), which is resistant to corrosion and can be used outdoors.
●A basket is provided to remove coarse dust. -
TP models (manual)- Pumps for Specific ApplicationsPressurization pump washing/spraying machine
- Products for general households
other specific uses
●The operation handle is placed at right angles to the discharge port and the pressure gauge, so it does not get in the way during operation and is easy to operate.
●Improved fulcrum to increase pressure -
THP models (for well use)- Pumps for Specific ApplicationsFor shallow well For deep well
- Products for general households
for well water
●Can be used where the suction height is within 8m.
●Automatic operation that automatically starts and stops operation according to the opening and closing of the faucet.
●Equipped with an automatic heat-retaining device to prevent freezing. -
THPC models (for well use)- Pumps for Specific ApplicationsFor shallow well For deep well
- Products for general households
- for well water
●Can be used where the suction height is within 20m.
●Automatic operation that automatically starts and stops operation according to the opening and closing of the faucet.
●Equipped with an automatic heat-retaining device to prevent freezing. -
TY models (Air Pumps)- Pumps for Specific ApplicationsAir Pumps
- Products for general households
for septic tank
●Blower pump for septic tank.
● Completely prevents rainwater and dust from entering.
● Easy to install, no ground work required. -
TMH models- Pumps for Specific ApplicationsChemical Models
for the chemical industry
TMHM-21N, TMHM-316M (100V, air motor compatible)
●Compact, lightweight and easy to operate.
●Corrosion resistant design.
· TMHM-21N, suitable for transfer solutions of acids and alkalis
· TMHM-316M made of SUS316 for the solvent
●It can also be used for pail cans, plastic cans, and cubitainers (diameter φ31).TMH-55N2 (100V compatible)
●A high lift is achieved by adopting a high-efficiency impeller.
●Weight is reduced by using a compact motor.TMH-108 (100V, air motor, explosion-proof electric motor [100V] compatible)
●The continuous-rated, fully-enclosed fan-cooled motor is covered with integrally molded resin to improve the motor's corrosion resistance and electrical resistance.
●As a motor compatible with explosion-proof environments, we have prepared an explosion-proof motor (d2G3) specification that has passed the type test specified by the Minister of Health, Labor and Welfare.TMH-105 (100V, air motor compatible)
●A high lift (12m) and a large capacity (105ℓ/min) are possible by adopting a high-efficiency impeller.
●Surplus operation due to increased output.
●Even though it uses a large electric motor, the weight is reduced.TMH-107D (SUS) (100V, air motor, explosion-proof electric motor [100V] compatible)
●Corrosion resistant design.
● Made of SUS304, it has excellent chemical resistance. (Designed to be compatible with organic solvents)
●Non-seal structure without liquid leakage. -
TMEX models- Pumps for Specific ApplicationsChemical Models
for industrial equipment- for the chemical industry
●Two-stage planetary gear reduction enables long-term continuous operation.
●Special rubber for high pressure resistance and Teflon lining are standard specifications, so it has excellent chemical resistance, and the horizontal repetitive motion of the rod enables the diaphragm to last forever.
●Strengthen the internal mechanism. Stepless adjustment is possible regardless of whether it is running or stopped.
●It is designed so that the intake and discharge valves are completely closed, the discharge rate is stable, and the performance curve is almost straight. -
TMTX models- Pumps for Specific ApplicationsChemical Models
- Pumps for Specific ApplicationsChemical Models
- for industrial equipment
- for the chemical industry
●Since the entire pump is covered with plastic, there is almost no rust and the appearance is not spoiled.
●Long-term continuous operation is possible due to planetary gear two-stage reduction.
●Aluminum material is used in combination to reduce weight.
● Quality has been improved by improving the ratchet mechanism. -
TMOK-S models- Pumps for Specific ApplicationsChemical Models
- Pumps for Specific ApplicationsChemical Models
- for industrial equipment
- for the chemical industry
●The adoption of CSS (centrifugal shaft seal device) ensures that the seal is non-contact and non-sliding during operation.
There is no wear of seals due to slurry or heat generation due to dry operation.
●It is also possible to manufacture PTFE or UPE depending on the liquid used.
FAQs
Provides help information on how to use each product and when you have problems.
