絞り込み
Submersible Pumps
Plastic/stainless steel models
-
CS models (non-automatic)- Submersible PumpsPlastic/stainless steel models
for industrial equipment
for the chemical industry
●Wetted parts made of stainless steel, suitable for a wide range of applications as a light corrosion-resistant pump.
● Compact and lightweight design for easy transportation.
●Semi-open impeller that does not easily clog with foreign matter.
●For the shaft seal, a mechanical seal containing lubricating oil is used to prevent water from entering the motor and has excellent durability.
●Equipped with an automatic burnout prevention device in the motor. -
CS-L models (for bottom water)- Submersible PumpsPlastic/stainless steel models
for bottom water
● Drainage is possible up to a water level of 1 to 2 mm.
●Wetted parts made of stainless steel, suitable for a wide range of applications as a light corrosion-resistant pump.
● Compact and lightweight design for easy transportation.
●For the shaft seal, a mechanical seal containing lubricating oil is used to prevent water from entering the motor and has excellent durability.
●Equipped with an automatic burnout prevention device in the motor. -
CX models (non-automatic)/CXA models (automatic)- Submersible PumpsPlastic/stainless steel models
for fishing- for industrial equipment
for kitchen wastewater
for pit gray water
for septic tank- for the chemical industry
● Compact and lightweight type that is convenient to carry and install.
● All wetted parts are made of resin and stainless steel (SUS316), which greatly improves rust resistance and durability.
●Eliminates clogging with a uniquely developed vortex structure.
●Original development of high-efficiency, energy-saving impellers and electric motors.
●Equipped with an automatic burnout prevention device in the motor. -
CX-L models (for bottom water)- Submersible PumpsPlastic/stainless steel models
- for bottom water
● Drainage is possible up to a water level of 5 to 6 mm.
● Compact and lightweight type that is convenient to carry and install.
● All wetted parts are made of resin and stainless steel (SUS316), which greatly improves rust resistance and durability.
●Original development of high-efficiency, energy-saving impellers and electric motors.
●Equipped with an automatic burnout prevention device in the motor. -
PX models (non-automatic)/PXA models (automatic)- Submersible PumpsPlastic/stainless steel models
- Products for general households
- for industrial equipment
- for kitchen wastewater
- for pit gray water
- for septic tank
●Lightweight, compact and hard to clog.
● All wetted parts are made of resin and stainless steel for excellent rust resistance and durability.
● New mechanism that can change the discharge direction either "vertically" or "horizontally". (excluding 1.5kW and 2.2kW)
● Back pull-out structure that allows inspection and cleaning while piping is connected.
●Equipped with an automatic burnout prevention device in the motor.
● Cooling and lubricity of the mechanical seal are improved by adopting LLT (Long Life Tech). (0.25kW to 0.75kW) -
PG models (non-automatic)/PGA models (automatic)- Submersible PumpsPlastic/stainless steel models
- Products for general households
- for industrial equipment
- for pit gray water
●Wide range of applications such as clean water, sewage, and waste water.
● All wetted parts are made of resin and stainless steel for excellent rust resistance and durability.
● New mechanism that can change the discharge direction either "vertically" or "horizontally". (excluding 1.5kW and 2.2kW)
● Back pull-out structure that allows inspection and cleaning while piping is connected.
●Equipped with an automatic burnout prevention device in the motor.
● Cooling and lubricity of the mechanical seal are improved by adopting LLT (Long Life Tech). (0.25kW to 0.75kW) -
CS-N models (non-automatic)- Submersible PumpsPlastic/stainless steel models
- for fishing
- for industrial equipment
- for the chemical industry
● High-grade stainless steel SUS316 and SCS14 are used for all wetted parts. Resistant to acids, alkalis and salts.
● A double mechanical seal with excellent corrosion resistance and durability is used for the shaft seal.
●Equipped with an automatic burnout prevention device in the motor. (7.5kW or less)
FAQs
Provides help information on how to use each product and when you have problems.
