絞り込み
Model Name:C
-
CO (4P) gland packing SCS13 models- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
for agricultural
for industrial equipment
for the chemical industry
●Wetted parts are made of SCS13 and SUS304 for excellent corrosion resistance.
●Since it is a self-priming type, it can be drained and pumped with the first priming.
● Directly connected 4P motor for quiet operation and easy maintenance and inspection. -
CO (4P) gland packing SCS14 models
- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
- for the chemical industry
●Wetted parts are made of SCS14 and SUS316, so they have excellent corrosion resistance.
●Since it is a self-priming type, it can be drained and pumped with the first priming.
● Directly connected 4P motor for quiet operation and easy maintenance and inspection. -
COM (4P) mechanical seal SCS13 models
- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
- for the chemical industry
●Wetted parts are made of SCS13 and SUS304 for excellent corrosion resistance.
●Since it is a self-priming type, it can be drained and pumped with the first priming.
● Directly connected 4P motor for quiet operation and easy maintenance and inspection. -
COM (4P) mechanical seal SCS14 models
- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
- for the chemical industry
●Wetted parts are made of SCS14 and SUS316, so they have excellent corrosion resistance.
●Since it is a self-priming type, it can be drained and pumped with the first priming.
● Directly connected 4P motor for quiet operation and easy maintenance and inspection. -
COP (2P) mechanical seal models- On-land pumps (plastic)Direct-Coupled/Self-Priming Models
- for agricultural
for fishing- for industrial equipment
- for the chemical industry
●Wetted part uses resin and stainless steel, rust-resistant multi-type.
●By combining impellers and internal casings that have undergone waterway analysis, high performance is achieved.
● 2P motor direct connection, lightweight and compact space saving.
●Maintenance is easy with a mechanical seal on the shaft seal. -
CS models (non-automatic)- Submersible PumpsPlastic/stainless steel models
- for industrial equipment
- for the chemical industry
●Wetted parts made of stainless steel, suitable for a wide range of applications as a light corrosion-resistant pump.
● Compact and lightweight design for easy transportation.
●Semi-open impeller that does not easily clog with foreign matter.
●For the shaft seal, a mechanical seal containing lubricating oil is used to prevent water from entering the motor and has excellent durability.
●Equipped with an automatic burnout prevention device in the motor. -
CS-L models (for bottom water)- Submersible PumpsPlastic/stainless steel models
for bottom water
● Drainage is possible up to a water level of 1 to 2 mm.
●Wetted parts made of stainless steel, suitable for a wide range of applications as a light corrosion-resistant pump.
● Compact and lightweight design for easy transportation.
●For the shaft seal, a mechanical seal containing lubricating oil is used to prevent water from entering the motor and has excellent durability.
●Equipped with an automatic burnout prevention device in the motor. -
CX models (non-automatic)/CXA models (automatic)- Submersible PumpsPlastic/stainless steel models
- for fishing
- for industrial equipment
for kitchen wastewater
for pit gray water
for septic tank- for the chemical industry
● Compact and lightweight type that is convenient to carry and install.
● All wetted parts are made of resin and stainless steel (SUS316), which greatly improves rust resistance and durability.
●Eliminates clogging with a uniquely developed vortex structure.
●Original development of high-efficiency, energy-saving impellers and electric motors.
●Equipped with an automatic burnout prevention device in the motor. -
CX-L models (for bottom water)- Submersible PumpsPlastic/stainless steel models
- for bottom water
● Drainage is possible up to a water level of 5 to 6 mm.
● Compact and lightweight type that is convenient to carry and install.
● All wetted parts are made of resin and stainless steel (SUS316), which greatly improves rust resistance and durability.
●Original development of high-efficiency, energy-saving impellers and electric motors.
●Equipped with an automatic burnout prevention device in the motor. -
CSA models (automatic)- Submersible PumpsCompact Models
household use
●Wetted parts are completely rust-proof.
●Greatly improved durability.
●Simple structure for easy maintenance and inspection.
● Compact and lightweight type that is easy to handle.
●Equipped with an automatic burnout prevention device in the motor.
● Plug with earth leakage breaker.
FAQs
Provides help information on how to use each product and when you have problems.
