絞り込み
Model Name:T
-
TO (4P) gland packing models- On-Land Pumps (Cast Iron)Direct-Coupled/Self-Priming Models
for agricultural
for industrial equipment
for pit gray water
● Impellers can be easily attached and detached with jack bolts.
●Maintenance can be performed without disconnecting the piping.
●All cast iron is the standard specification, so it can also be used for alkaline liquids.
●Improve the durability of the pump.
●Further pursuit of self-priming capability. -
TCMF models- Pumps for Specific ApplicationsEquipment Embedding
other specific uses
●Since the connection part uses resin, synthetic rubber, and stainless steel, there is no need to worry about red rust water, etc., and it is hygienic.
●Liquid temperature can be used up to 90℃. (When using fresh water)
●The pump part is lightweight because it is made of resin. -
TRC models- Pumps for Specific ApplicationsCoolant Models
Coolant and floating oil collection related
●Solid-liquid separation from dirty liquid produces clean liquid.
The solid-liquid separated sludge is discharged outside.
● Sludge removal rate is over 90%. (In the case of a particle size of 20 μm or more, our company's test results)
●Magnetic material (cast metal) and non-magnetic material (aluminum/abrasive) can be filtered.
●Running costs can be reduced because there are no consumable parts such as filter elements.
● Special rubber is used for wetted parts to improve durability and wear resistance.
●Main unit can be disassembled and maintained.
● Filtration is possible at an inflow pressure of 0.1 MPa or more. -
TP models (manual)- Pumps for Specific ApplicationsPressurization pump washing/spraying machine
- Products for general households
- other specific uses
●The operation handle is placed at right angles to the discharge port and the pressure gauge, so it does not get in the way during operation and is easy to operate.
●Improved fulcrum to increase pressure -
THP models (for well use)- Pumps for Specific ApplicationsFor shallow well For deep well
- Products for general households
for well water
●Can be used where the suction height is within 8m.
●Automatic operation that automatically starts and stops operation according to the opening and closing of the faucet.
●Equipped with an automatic heat-retaining device to prevent freezing. -
THPC models (for well use)- Pumps for Specific ApplicationsFor shallow well For deep well
- Products for general households
- for well water
●Can be used where the suction height is within 20m.
●Automatic operation that automatically starts and stops operation according to the opening and closing of the faucet.
●Equipped with an automatic heat-retaining device to prevent freezing. -
TY models (Air Pumps)- Pumps for Specific ApplicationsAir Pumps
- Products for general households
for septic tank
●Blower pump for septic tank.
● Completely prevents rainwater and dust from entering.
● Easy to install, no ground work required. -
TSJM (2P) mechanical seal models- On-Land Pumps (Cast Iron)Close-Coupled/Non-Self-Priming Models
for cooling tower
for high pressure- for industrial equipment
●Compact and lightweight due to the adoption of a 2-pole electric motor.
● Covers a wide range of specifications, and performance is comparable to that of a large model.
● Easy to install without taking up space.
●The B.P.O (back pull-out) structure allows disassembly and assembly without removing the piping, making maintenance and inspection easy.
●Because it is discharged directly from above, it is advantageous against the piping load with stable installation. -
TASC (4P) mechanical seal models- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
- for industrial equipment
for the chemical industry
※It is a discontinued model.
●Compact/lightweight models with simple structures. Can provide high pump heads with little power.
●Outstanding suction performance can easily pump low-viscosity highly volatile liquids. -
TFS/TFSH (4P) gland packing SCS13 models- On-Land Pumps (Stainless Steel)Direct-Coupled/Non-Self-Priming Models
- for industrial equipment
- for the chemical industry
●Rational design and thorough quality control ensure high reliability, durability, and interchangeability of parts.
●High efficiency reduces initial and running costs.
●Gland packing is standard for the shaft seal.
It is also possible to manufacture a water-cooled system.
FAQs
Provides help information on how to use each product and when you have problems.
