絞り込み
for fishing
-
COP (2P) mechanical seal models- On-land pumps (plastic)Direct-Coupled/Self-Priming Models
for agricultural
for fishing
for industrial equipment
for the chemical industry
●Wetted part uses resin and stainless steel, rust-resistant multi-type.
●By combining impellers and internal casings that have undergone waterway analysis, high performance is achieved.
● 2P motor direct connection, lightweight and compact space saving.
●Maintenance is easy with a mechanical seal on the shaft seal. -
CX models (non-automatic)/CXA models (automatic)- Submersible PumpsPlastic/stainless steel models
- for fishing
- for industrial equipment
for kitchen wastewater
for pit gray water
for septic tank- for the chemical industry
● Compact and lightweight type that is convenient to carry and install.
● All wetted parts are made of resin and stainless steel (SUS316), which greatly improves rust resistance and durability.
●Eliminates clogging with a uniquely developed vortex structure.
●Original development of high-efficiency, energy-saving impellers and electric motors.
●Equipped with an automatic burnout prevention device in the motor. -
MZ models- Pumps for Specific ApplicationsEjector Pumps
- for fishing
●Transfer of solid matter up to 80% diameter is possible.
●The direction of the ejector can be freely rotated 360°.
●The suction hose, discharge hose, and other hoses are easy to attach and detach with hose couplings.
●The ejector is equipped with an adjustment handle that can freely change the transfer speed and transfer amount.
●Combine with Terada's unique bypass unit to ensure reliable transfer even under harsh site conditions.
●Even if air is sucked from the tip of the hose during suction work, the transfer function does not change. -
CMP (2P) mechanical seal models- On-land pumps (plastic)Close-Coupled/Self-Priming Models
- Products for general households
- for agricultural
- for fishing
- for industrial equipment
- for the chemical industry
●Wetted parts are made of resin and stainless steel. Rust-resistant multi-type.
●By combining impellers and internal casings that have undergone waterway analysis, high performance is achieved.
●Integrated low-noise electric motor and pump for compact and quiet operation.
●Maintenance is easy with a mechanical seal on the shaft seal.
●The electric motor comes with a manual return type protector to prevent burnout. (0.45kW or less)
● Uses a fully enclosed fan-cooled outdoor motor. (Excluding 0.1kW) -
CMP-D (2P) mechanical seal models- On-land pumps (plastic)Close-Coupled/Self-Priming Models
- Products for general households
- for fishing
●Wetted parts are made of resin and stainless steel. Rust-resistant multi-type.
●Maintenance is easy with a mechanical seal on the shaft seal.
●Power supply dedicated to DC 24V.
●Reverse prevention function: Reliable design that does not start the motor when wiring is reversed.
● High performance is achieved by combining a semi-open impeller and a casing that have undergone waterway analysis.
●Integrated low-noise electric motor and pump for compact and quiet operation. -
CSL-L models (for bottom water)- Submersible PumpsCompact Models
- Products for general households
for bottom water- for fishing
household use
● Drainage is possible up to a water level of 2 mm.
●Wetted parts are completely rust-proof.
●Greatly improved durability.
●Simple structure for easy maintenance and inspection.
● Compact and lightweight type that is easy to handle.
●Equipped with an automatic burnout prevention device in the motor.
●Plug with earth leakage breaker. -
S-D models (for DC power supplies)- Submersible PumpsFor DC Power Supplies
- Products for general households
- for fishing
●The cabtyre cable does not distinguish between polarities and rotates in the normal direction no matter how it is connected.
●The mechanical seal is an oil bath method, and has excellent durability.
●Large discharge volume enables pumping up a large amount in a short time. -
CSD models (for DC power supplies)- Submersible PumpsFor DC Power Supplies
- Products for general households
- for fishing
※It is a discontinued model.
●The cabtyre cable does not distinguish between polarities and rotates in the normal direction no matter how it is connected.
●The mechanical seal is an oil bath method, and has excellent durability.
●Large discharge volume enables pumping up a large amount in a short time. -
CEP models (plastic)- Engine PumpsCompact size Models
- Products for general households
- for agricultural
- for fishing
●Portable, compact and lightweight type that achieves high pressure and high volume discharge capability.
●The special self-priming circuit provides excellent self-priming performance.
●Multi-type that uses resin and stainless steel (SUS316) for wetted parts and is resistant to rust and seawater.
● Semi-open impeller and mechanical seal on the shaft seal make maintenance easy. -
CS-N models (non-automatic)- Submersible PumpsPlastic/stainless steel models
- for fishing
- for industrial equipment
- for the chemical industry
● High-grade stainless steel SUS316 and SCS14 are used for all wetted parts. Resistant to acids, alkalis and salts.
● A double mechanical seal with excellent corrosion resistance and durability is used for the shaft seal.
●Equipped with an automatic burnout prevention device in the motor. (7.5kW or less)
FAQs
Provides help information on how to use each product and when you have problems.
