絞り込み
for industrial equipment
-
TCVS models (non-automatic)- Submersible PumpsCast Iron Models
for civil engineering
for industrial equipment
for kitchen wastewater
for pit gray water
for septic tank
●The newly designed high-performance whirlpool impeller prevents clogging and winding even in sewage containing fibrous contaminants.
● Low-wear type that prevents foreign matter from directly passing through the impeller.
●Built-in automatic return type motor protection device (auto cut).
●The shaft seal uses a double mechanical seal and an oil seal. (1.5 kW or more when combined with an oil seal)
●SiC with excellent wear resistance is used for the sliding part of the mechanical seal. -
TCN models (non-automatic)- Submersible PumpsCast Iron Models
- for civil engineering
- for industrial equipment
- for pit gray water
●Built-in automatic return type motor protection device (auto cut).
●The shaft seal uses a double mechanical seal and an oil seal or seal ring (5.5 to 7.5kW only).
●SiC with excellent wear resistance is used for the sliding part of the mechanical seal.
● Built-in equalizer (pressure adjustment mechanism) in the oil chamber (2.2 to 7.5 kW only). -
SD models (non-automatic)- Submersible PumpsCast Iron Models
- for civil engineering
- for industrial equipment
- for pit gray water
● Easy to use and economical, reliable operation even under harsh conditions.
●Simple structure, small size and light weight, and excellent wear resistance.
● We have a wide range of models for general construction that can be used in a wide range of applications.
●Built-in electric motor protector. (11 kW or less) -
SXD models (non-automatic)- Submersible PumpsCast Iron Models
- for civil engineering
- for industrial equipment
- for pit gray water
● All models use aluminum alloy for the motor frame and upper casing.
●The direction of the discharge pipe can be changed so that the hose does not bend or bend unnecessarily.
●Employs a semi-internal motor frame cooling system that enables continuous operation even at low water levels.
●Vortex type impeller with long life and wear resistance.
●Large gap prevents blockage of wood chips and sand, eliminating troubles on site.
●Equipped with an automatic burnout prevention device in the motor. -
SDK models (non-automatic)- Submersible PumpsCast Iron Models
- for civil engineering
- for industrial equipment
●The main drainage channel is independent, and a very small amount of the drainage is divided to cool the peripheral wall of the motor room, making it compact.
●Strong structure, abrasion resistance, excellent durability.
●Equipped with an automatic burnout prevention device in the motor. (11 kW or less) -
S models (non-automatic; 1.5 to 5.5 kW)- Submersible PumpsSpecial Synthetic Rubber Models
- for civil engineering
- for industrial equipment
●By using lightweight materials, weight reduction is achieved.
●Vortex type impeller with long life and wear resistance makes it easy to pump water mixed with earth and sand.
● 4-end face SiC mechanical seals are used for shaft seals, and oil immersion method is adopted for outstanding durability.
● Uses a new type motor that keeps the temperature rise of the motor windings low.
●Equipped with an automatic burnout prevention device in the motor. -
TMEX models- Pumps for Specific Applications
- for industrial equipment
for the chemical industry
●Two-stage planetary gear reduction enables long-term continuous operation.
●Special rubber for high pressure resistance and Teflon lining are standard specifications, so it has excellent chemical resistance, and the horizontal repetitive motion of the rod enables the diaphragm to last forever.
●Strengthen the internal mechanism. Stepless adjustment is possible regardless of whether it is running or stopped.
●It is designed so that the intake and discharge valves are completely closed, the discharge rate is stable, and the performance curve is almost straight. -
TMTX models- Pumps for Specific ApplicationsChemical Models
- for industrial equipment
- for the chemical industry
●Since the entire pump is covered with plastic, there is almost no rust and the appearance is not spoiled.
●Long-term continuous operation is possible due to planetary gear two-stage reduction.
●Aluminum material is used in combination to reduce weight.
● Quality has been improved by improving the ratchet mechanism. -
TMOK-S models- Pumps for Specific ApplicationsChemical Models
- for industrial equipment
- for the chemical industry
●The adoption of CSS (centrifugal shaft seal device) ensures that the seal is non-contact and non-sliding during operation.
There is no wear of seals due to slurry or heat generation due to dry operation.
●It is also possible to manufacture PTFE or UPE depending on the liquid used. -
TMOK-V models- Pumps for Specific ApplicationsChemical Models
- for industrial equipment
- for the chemical industry
●Dry operation is OK due to the non-seal structure.
●Few consumable parts.
FAQs
Provides help information on how to use each product and when you have problems.
