絞り込み
chemical solution
-
TMH models- Pumps for Specific ApplicationsChemical Models
for the chemical industry
TMHM-21N, TMHM-316M (100V, air motor compatible)
●Compact, lightweight and easy to operate.
●Corrosion resistant design.
· TMHM-21N, suitable for transfer solutions of acids and alkalis
· TMHM-316M made of SUS316 for the solvent
●It can also be used for pail cans, plastic cans, and cubitainers (diameter φ31).TMH-55N2 (100V compatible)
●A high lift is achieved by adopting a high-efficiency impeller.
●Weight is reduced by using a compact motor.TMH-108 (100V, air motor, explosion-proof electric motor [100V] compatible)
●The continuous-rated, fully-enclosed fan-cooled motor is covered with integrally molded resin to improve the motor's corrosion resistance and electrical resistance.
●As a motor compatible with explosion-proof environments, we have prepared an explosion-proof motor (d2G3) specification that has passed the type test specified by the Minister of Health, Labor and Welfare.TMH-105 (100V, air motor compatible)
●A high lift (12m) and a large capacity (105ℓ/min) are possible by adopting a high-efficiency impeller.
●Surplus operation due to increased output.
●Even though it uses a large electric motor, the weight is reduced.TMH-107D (SUS) (100V, air motor, explosion-proof electric motor [100V] compatible)
●Corrosion resistant design.
● Made of SUS304, it has excellent chemical resistance. (Designed to be compatible with organic solvents)
●Non-seal structure without liquid leakage. -
TMEX models- Pumps for Specific ApplicationsChemical Models
for industrial equipment- for the chemical industry
●Two-stage planetary gear reduction enables long-term continuous operation.
●Special rubber for high pressure resistance and Teflon lining are standard specifications, so it has excellent chemical resistance, and the horizontal repetitive motion of the rod enables the diaphragm to last forever.
●Strengthen the internal mechanism. Stepless adjustment is possible regardless of whether it is running or stopped.
●It is designed so that the intake and discharge valves are completely closed, the discharge rate is stable, and the performance curve is almost straight. -
TMTX models- Pumps for Specific ApplicationsChemical Models
- Pumps for Specific ApplicationsChemical Models
- for industrial equipment
- for the chemical industry
●Since the entire pump is covered with plastic, there is almost no rust and the appearance is not spoiled.
●Long-term continuous operation is possible due to planetary gear two-stage reduction.
●Aluminum material is used in combination to reduce weight.
● Quality has been improved by improving the ratchet mechanism. -
TMOK-S models- Pumps for Specific ApplicationsChemical Models
- Pumps for Specific ApplicationsChemical Models
- for industrial equipment
- for the chemical industry
●The adoption of CSS (centrifugal shaft seal device) ensures that the seal is non-contact and non-sliding during operation.
There is no wear of seals due to slurry or heat generation due to dry operation.
●It is also possible to manufacture PTFE or UPE depending on the liquid used. -
TMOK-V models- Pumps for Specific ApplicationsChemical Models
- Pumps for Specific ApplicationsChemical Models
- for industrial equipment
- for the chemical industry
●Dry operation is OK due to the non-seal structure.
●Few consumable parts. -
TN models- Pumps for Specific ApplicationsChemical Models
- Pumps for Specific ApplicationsChemical Models
- for industrial equipment
- for the chemical industry
●Magnetic pump for a wide range of chemicals.
●Faithful to the basics, highly reliable and long-life design.
● Abundant series configuration from 6W to 250W. -
TM models- Pumps for Specific ApplicationsChemical Models
- Pumps for Specific ApplicationsChemical Models
- for industrial equipment
- for the chemical industry
●As a medium-capacity chemical magnet pump, materials and structures for a wide range of chemical liquids are available.
●There is no liquid leakage due to the magnet drive structure.
●It supports a wide range of chemicals by selecting the wetted part material.
●Casting (FCD) models with an exterior cover are ideal for high temperature and high pressure applications.
● All standard motors are totally enclosed fan-cooled outdoor type.
●It has a long service life by adopting a structure that is resistant to idling.
FAQs
Provides help information on how to use each product and when you have problems.
