絞り込み
waste water without solids
-
B models (high pump head type)- V-Belt-Driven PumpsV-Belt-Driven/Self-Priming Models
for agricultural
for high pressure
●High pressure is generated by an excellent mechanism, and a large amount of water is discharged.
●It has excellent self-priming power, and can be pumped by self-priming in a short time.
●Uses a semi-open impeller for excellent durability and smooth pumping.
●No lubrication is required during operation due to the special structure of the mechanical seal, making maintenance and inspections easy.
●Simple structure and easy maintenance.
●A wide range of specifications are available from medium to high speed rotation, allowing you to select the model that best suits your purpose. -
OSA models (medium/low-speed type)- V-Belt-Driven PumpsV-Belt-Driven/Self-Priming Models
- for agricultural
●It has excellent self-priming ability, and can be pumped and pumped with the first water supply.
●Once water is pumped up, it is easy to manage because water always remains in the pump body.
●The specially designed semi-open impeller can handle the pumping of sediment mixed water and sewage passing through the strainer. -
DS1-120 models (OIL SKIMMER)- Pumps for Specific ApplicationsCoolant Models
Coolant and floating oil collection related
● A bellows-type surface liquid suction device that follows the liquid surface is used.
It is possible to follow and inhale water level fluctuations up to about 90 mm.
●Separation tank and pump unit can be separated.
You can easily clean the separation tank.
●A bellows pump is used for the suction pump.
"Collects floating oil stably."
No priming required, dry operation possible. -
DSF models (Float Pumps)- Pumps for Specific ApplicationsCoolant Models
- Coolant and floating oil collection related
●The float + bellows type surface liquid suction device eliminates the need for adjustment even when the water level fluctuates.
Follows water level fluctuations as long as the water level is above the minimum operable level.
●Small size, light weight and easy to carry.
It fits into a circular manhole inner diameter of φ600.
● Collects and discharges floating oil and floating matter.
●A vortex-type submersible pump is used to prevent clogging even with solids. -
DSB models (Oil-water separation tank)- Pumps for Specific ApplicationsCoolant Models
- Coolant and floating oil collection related
●It has a simple structure that separates oil and water based on the difference in specific gravity.
It is an eco-friendly product because it does not use consumables such as filters.
"Cleaning and disassembly maintenance can be performed easily."
●The main body of the oil-water separation tank is made of stainless steel (SUS304), which is resistant to corrosion and can be used outdoors.
●A basket is provided to remove coarse dust. -
PX models (non-automatic)/PXA models (automatic)- Submersible PumpsPlastic/stainless steel models
- Products for general households
for industrial equipment
for kitchen wastewater
for pit gray water
for septic tank
●Lightweight, compact and hard to clog.
● All wetted parts are made of resin and stainless steel for excellent rust resistance and durability.
● New mechanism that can change the discharge direction either "vertically" or "horizontally". (excluding 1.5kW and 2.2kW)
● Back pull-out structure that allows inspection and cleaning while piping is connected.
●Equipped with an automatic burnout prevention device in the motor.
● Cooling and lubricity of the mechanical seal are improved by adopting LLT (Long Life Tech). (0.25kW to 0.75kW) -
PG models (non-automatic)/PGA models (automatic)- Submersible PumpsPlastic/stainless steel models
- Products for general households
- for industrial equipment
- for pit gray water
●Wide range of applications such as clean water, sewage, and waste water.
● All wetted parts are made of resin and stainless steel for excellent rust resistance and durability.
● New mechanism that can change the discharge direction either "vertically" or "horizontally". (excluding 1.5kW and 2.2kW)
● Back pull-out structure that allows inspection and cleaning while piping is connected.
●Equipped with an automatic burnout prevention device in the motor.
● Cooling and lubricity of the mechanical seal are improved by adopting LLT (Long Life Tech). (0.25kW to 0.75kW) -
S models (non-automatic)- Submersible PumpsSpecial Synthetic Rubber Models
- Products for general households
- for agricultural
for civil engineering
For flood and disaster countermeasures
●Excellent abrasion resistance in the 220W, 250W, and 500W classes.
●Uses special resin and synthetic rubber with improved wear resistance and durability, and a new type of shaft sealing system.
● Compact and lightweight type that is easy to handle.
●Equipped with an automatic burnout prevention device in the motor. -
S-500LN (for bottom water)- Submersible PumpsSpecial Synthetic Rubber Models
- Products for general households
for bottom water
●Drainage less than 1mm is realized. (with check valve)
●Outstanding abrasion resistance in the 500W class.
● Compact and lightweight type that is easy to handle.
●Equipped with an automatic burnout prevention device in the motor. -
SP-220 models (non-automatic)- Submersible PumpsSpecial Synthetic Rubber Models
- Products for general households
- for agricultural
- for civil engineering
●Excellent abrasion resistance in the 220W class, ideal for liquids containing earth and sand.
●Uses special resin and synthetic rubber with improved wear resistance and durability, and a new type of shaft sealing system.
● Compact and lightweight type that is easy to handle.
●Equipped with an automatic burnout prevention device in the motor.
FAQs
Provides help information on how to use each product and when you have problems.
