●The operation handle is placed at right angles to the discharge port and the pressure gauge, so it does not get in the way during operation and is easy to operate.
●Improved fulcrum to increase pressure

●Can be used where the suction height is within 8m.
●Automatic operation that automatically starts and stops operation according to the opening and closing of the faucet.
●Equipped with an automatic heat-retaining device to prevent freezing.

●Can be used where the suction height is within 20m.
●Automatic operation that automatically starts and stops operation according to the opening and closing of the faucet.
●Equipped with an automatic heat-retaining device to prevent freezing.

●Blower pump for septic tank.
● Completely prevents rainwater and dust from entering.
● Easy to install, no ground work required.

●Excellent self-priming performance, no need for foot valve and easy pumping operation.
●By using ball bearings and gland packing for shaft sealing, maintenance is easy.
●The simple structure conforms to the self-priming theory and exhibits reliable self-priming performance, with low noise and low vibration.

●The impeller with three-dimensional blades and natural casing flow path achieve high pump efficiency.
●The casing has a volute structure based on a unique design, and the load in the radial direction maintains fluid balance.
●Ball bearings/angular bearings with large load capacity are used for the main bearings, which are easy to handle.
●Remarkably light weight and small size achieved by epoch-making design method including volute casing.

●Stable quality and performance.
●Simple design, highly complete pump.
● Sealed ball bearings eliminate the need for lubrication.
● An energy-saving pump equipped with a top-runner efficiency (equivalent to IE3) electric motor. (Excluding 0.4kW models)

●Compact and lightweight due to the adoption of a 2-pole electric motor.
● Covers a wide range of specifications, and performance is comparable to that of a large model.
● Easy to install without taking up space.
●The B.P.O (back pull-out) structure allows disassembly and assembly without removing the piping, making maintenance and inspection easy.
●Because it is discharged directly from above, it is advantageous against the piping load with stable installation.

● Space-saving in-line type that can be installed in the middle of piping.
● Suitable for hot/cold water circulation.
●There is almost no liquid leakage due to the use of a mechanical seal.
●Also available for household single-phase 100V power supply.
● Can be disassembled without removing the pipe connections, making inspection and repair easy.

●Wetted parts are made of SCS13 and SUS304 for excellent corrosion resistance.
●2P motor direct connection, lightweight and compact space-saving type
● Lineup of models for a wide range of applications for high lift.